TP-Link CPE210 300Mbps 9dBi Outdoor CPE w/ 2x Internal Antennas

Specifications

• Mfr Part Number: CPE210
• Features:
  • Built-in 9dBi 2x2 dual-polarized directional MIMO antenna
  • Adjustable transmission power from 0 to 27dBm/500mw
  • System-level optimization for more than 5km long range wireless transmission
  • TP-LINK Pharos MAXtream TDMA(Time-Division-Multiple-Access) technology improves product performance in throughput, capacity and latency, ideal for PTMP applications
  • Centralized Management System - Pharos Control
  • AP / Client / Repeater / AP Router / AP Client Router (WISP) operation modes
  • Outdoor stabilized enclosure with IPX5 waterproof certification
  • Dual Ethernet ports and grounding terminal integrated
  • 6000V Lightning Protection, 15KV ESD Protection
  • Passive PoE Adapter supports up to 60 meters (200 feet) power over Ethernet deployment and allows for device reset remotely
  • Provides WEP, WPA/WPA2, WPA-PSK/WPA2-PSK data security
  • Selectable bandwidth of 5/10/20/40MHz
  • Provides Throughput Monitor, Spectrum Analyzer, Speed Test and Ping tools
  • Easy antenna alignment with wireless signal quality indicators via Web interface
• Hardware:
  • Processor: Qualcomm Atheros 560MHz CPU, MIPS 74Kc
  • Memory: 64MB DDR2 RAM, 8MB Flash
  • Interfaces: 1x 10/100Mbps Shielded Ethernet Port (LAN0,Passive PoE in), 1x 10/100Mbps Shielded Ethernet Port (LAN1, Passive PoE
    Passthrough), 1x Grounding Terminal
  • Antenna:
    • Beam Width: 65° (H-Plane) / 35° (E-Plane)
    • Built-in 9dBi 2x2 Dual-polarized Directional Antenna
  • Protection: 15KV ESD Protection; 6000V Lightning Protection
  • Power Consumption: 10.5 Watts (Max)
  • Power Supply: 
    • Passive Power over Ethernet via LAN0 (+4,5pins; -7,8pins)
    • Voltage range - 16-27VDC
  • Enclosure:
    • Outdoor ASA stabilized plastic material
    • IPX5 waterproof Certification
  • Dimensions (WxDxH): 224.0 x 79.0 x 60.0 mm
• Wireless:
  • Standard: IEEE 802.11b/g/n (with Pharos MAXtream disabled)
  • Proprietary Protocol: TDMA Mode (with Pharos MAXtream enabled)
  • Wireless Speeds:
    • Up to 300Mbps (40MHz, Dynamic)
    • Up to 144.4 Mbps (20 MHz, Dynamic)
    • Up to 72.2 Mbps (10 MHz, Dynamic)
    • Up to 36.1 Mbps (5 MHz, Dynamic)
  • Frequency: 2.4 ~ 2.483GHz
  • Reception Sensitivity:
    • 802.11b:
      • 11M: -95dBm, 5.5M: -96dBm, 2M: -96dBm, 1M: -96dBm
    • 802.11g:
      • 54M: -79dBm, 48M: -80dBm, 36M: -84dBm, 6-24M: -88dBm
    • 802.11n:
      • MCS15: -76dBm, MCS14: -78dBm, MCS13: -80dBm,MCS12: -84dBm, MCS11: -87dBm, MCS10: -91dBm,MCS9: -93dBm, MCS8: -96dBm, MCS7: -76dBm,MCS6: -78dBm, MCS5: -80dBm, MCS4: -84dBm,MCS3: -87dBm, MCS2: -91dBm, MCS1: -93dBm, MCS0: -96dBm
  • Transmission Power: 27dBm / 500mw (Adjustable power by 1dBm)
• Software:
  • Wireless Configurations:
    • Pharos MAXtream TDMA Technology
    • 802.11b/g/n Modes
    • Selectable Channel Width: 5/10/20/40MHz
    • Automatic Channel Selection
    • Transmission Power Control
    • Dynamic Frequency Selection (DFS)
    • WDS Enable/Disable
    • Security: WPA/WPA2, WPA-PSK/WPA2-PSK (AES/TKIP) Encryption, 64/128/152-bit WEP Encryption
    • SSID Broadcast Enable/Disable
    • Multi-SSID with VLAN Tagging (AP mode only)
    • Distance/ACK Timeout Setting
    • Wireless MAC Address Filter
    • Wireless Advanced:
      • Beacon Interval/RTS Threshold/Fragmentation
      • Threshold/DTIM Interval/AP Isolation/Short GI/Wi-Fi Multimedia
  • Management:
    • Discovery and Remote Management via Pharos Control Application
    • HTTP/HTTPS Web-Based management
    • System Log
    • SNMP Agent (v2c)
    • Ping Watch Dog
    • Dynamic DDNS
    • SSH Server
  • System Tools:
    • Wireless Signal Quality Indicators: Signal Strength/ Noise/ Transmit CCQ/ CPU/ Memory
    • Monitors: Throughput/ Stations/ Interfaces/ ARP/ Routes/ WAN/ DHCP
    • Spectrum Analyzer
    • Speed Test
    • Ping
    • Traceroute
  • System-level Optimizations:
    • Optimized IGMP Snooping/Proxy for multicast applications
    • Hardware watch dog
• POE Adapter:
  • Efficiency: >80%
  • Certifications: CE/FCC/UL/IC/GS/PSB/C-tick/SAA/S-Mark/KC-mark
  • Button: Remote Reset Button
  • LED: 0~0.8A (Green); 0.8A~1.0A (Red)
  • Input:
    • Current: 0.8A Max @ 100V AC
    • Voltage: 100V ~ 240V AC @ 50Hz ~ 60Hz
  • Output: 24V DC, 1.0A Max (+4, 5pins; -7, 8pins)
  • Interfaces: 1x AC Jack with Earth Ground, 1x 10/100Mbps Shielded Ethernet Port (Power + Data), 1x 10/100Mbps Shielded Ethernet Port (Data)
  • Dimensions (WxDxH): 110.0 x 57.0 x 33.5 mm
• Others:
  • Certification: CE, FCC, RoHS, IPX5
  • Package Contents:
    • Outdoor Wireless CPE
    • 24V 1A Passive PoE Adapter
    • Pole Mounting Straps
    • AC Power Cord
    • Installation Guide
  • System Requirements:
    • Microsoft Windows 98SE, NT, 2000, XP, Vista or Windows 8, Windows 7, MAC OS, NetWare, UNIX or Linux